Feed Mill Machinery and Equipment
The vital link to your feed chain
Feed industry is one of the most momentous links in food supply chain of man. Today, increasing demand for animal feed has led to a growing need to produce high capacity and quality machines by manufacturers. Otherwise, they would not be able to play an effective role in the market. In this regard, the Van Aarsen International, relying on the most experienced and skilled experts and an updated knowledge produces state of art machines of feed industry.
Dosing and Weighing Systems:
Van Aarsen International produces 3 models of dosing machines including Small Ingredient Dosing (SID), Micro Ingredient Dosing (MID) and Precision Ingredient Dosing (PID) as a complete solution to reach the highest accuracy and capacity in dosing of wide range of materials like vitamins and minerals in process.
Micro Ingredient Dosing Datasheet
Small Ingredient Dosing Datasheet
Precision Ingredient Dosing Datasheet
Downloal Fine Dosing SID-MID-PID Movie
Hammer Mill:
The GD and 2D hammer mills are designed for the animal feed industry, to grind raw materials into small particles and meal. Both the GD and 2D hammer mill series cover capacities ranging from 5 to 100 tons per hour, dependent on type of raw material, formula and required grinding structure. It is possible to use automatic screen exchange system together with this machine which can decrease the time of screen exchange from 20 to 1 minute.
Feeding Device for GD Hammer Mill Datasheet
Download Hammer Mill Introduction Movie
Download Grinding Screen Exchange- GD Hammer Mill Movie
Download Grinding Replacement Hammers Movie
Mixers:
The range of single & twin shaft, multimix paddle mixers and liquid mixers are designed to mix a wide range of raw materials, additives and liquids into a homogeneous animal feed mixture, all within a short mixing time.
Multimix Single Shaft Paddle Mixer Datasheet
Multimix Twin Shaft Paddle Mixer Datasheet
Multi Premix Paddle Mixer Datasheet
Pellet Mill:
Animal feed pellets can be produced in several diameters and hardnesses, by pelletizing raw materials after grinding, mixing and conditioning. Producing the feed in shape of pellet can facilitate product transportation, more homogeneity and prevention of feed selection by animal. The Van Aarsen C and CU pellet mill range enable capacities up to 60 tons per hour depending on various parameters.
C and CU Pellet Mills Datasheet
Download CU Pellet Mill Easy-to-Clean Coating Movie
Download CU Dynamic Pellet Mill Recipe Controlled Rolled Gap Setting Movie
Download Die Change CU900 Dynamic Pellet Mill Movie
Conditioners:
Conditioning is the result of three variables: moisture, temperature and time. As moisture and temperature are related, time is the ultimate variable to enhance the process. Time can be gained with the application of a Long Term Conditioner (LTC). The LTC, consisting of a steam mixer, automatic steam quantity control and a Long Term Vessel (LTV), significantly improves the process of feed conditioning. This has a major effect on biosecurity, optimizing the nutritional quality of the feed and enhancing the pelletability of the product as well as improving the pellet quality.
Long Term Conditioner Datasheet
Hot Air Hygienic System Datasheet
Coater:
The Van Aarsen coaters are designed to add fats and soluble additives such as enzymes and probiotics on animal feed pellets. It can increase energy density of the pellets by higher liquids inclusion levels. The advantages of using this system instead of adding fat in die is to prevent contamination in pellet mill, more accurate dosing and better distribution of additives in the pellets.
Cascade Liquid Coater Datasheet
Counterflow Cooler:
The Van Aarsen counterflow cooling system is designed for cooling pellets after pelletizing back to about 5°C above ambient air temperature. This is done to achieve a good PDI, flow ability, protection against decay and minimizing the chemical and biochemical reactions. The counterflow cooling principle was invented by Van Aarsen and has become a blueprint all over the world within feed industry.
Crumbler:
During crumbling pellets are reduced to crumbs. The advantages of the pelleting process are maintained as much as possible. The size of the crumbs is adapted to the need of the animal and the feeding system. Meal intake consumes a lot of energy for an animal; crumbs on the other hand can be quickly and easily consumed.
Sieving Machines:
Sieving of raw materials may take place at the beginning of the process or after pelleting and crumbling and is intended to separate sizes. By sieving the raw materials first, the grinding process is optimized and energy can be saved. Smaller sizes do not need to be grinded. By sieving pellets and crumbles fines are sorted out, improving the quality of the end product. The fines itself are returned into the process preventing waste of raw materials.
Sieving Machine G-type Sizer Datasheet
Sieving Machine SEL-type Sizer Datasheet
Bulk Loading
The Van Aarsen moveable bulk robot weighers have been designed for fully automatic bulk loading of trucks with animal feed. The Van Aarsen bulk weighers are equipped with some of today’s most innovative features for maximum efficiency, performance, and ease of operation.
Moveable Bulk Robot Weigher Datasheet
Transport Equipment:
Transportation of product and making connection between machines in the process is provided using several means like: bucket elevator, conveyors, piping, valve box and some other equipment.
Piping for Gravity Conveying Datasheet
Storage Equipment:
Storage of bulk goods integrated in the total feed mill configuration is absolutely essential. The Van Aarsen storage bins and bunkers are another example of how we can help customers for successful integration of storage and stock supply. Van Aarsen equipment have been developed with focus on details for excellent flowing properties and hygiene.
Machine and feed mill automation:
To be able to make the right decisions in the production process, accurate information on production equipment, raw materials and stock is a requirement. With the Van Aarsen–Machine and Feed mill software you will get real-time insight into these processes. The operating system brings with it substantial cost savings.
